Fabrication and Assembly Services


There are several methods that can be used to remove burrs. Abrasive substances may be applied, or abrasive cloths may be used to rub the metal in order to remove thin shavings and small notches, as well as to polish the piece. In other cases, sanding may be necessary, whether this means a small amount of sanding by hand or rigorous sanding with a machine for more troublesome deformities. At Faspro, we use the deburring process that is best suited for your project.


Blanking is cutting up a large sheet of stock into smaller pieces suitable for the next operation in stamping, such as drawing and forming. Often this is combined with piercing. Blanking can be as simple as a cookie cutter type die to produce prototype parts, or high speed dies that run at 400+ strokes per minute, running coil stock that has been slit to a specified width. For production parts, the final configuration of the drawn or formed shape needs to be established before the blank die can be built, since the blank size and the slit width size needs to be established precisely. Since Faspro Technologies creates its own blanks, we will develop just the right blank for your project.


Faspro Technologies has more than 20 hand soldering stations and trained staff that can meet all of your prototype soldering needs. Faspro Technologies uses cadmium and lead free soldering paste making it easier for you to comply with REACH and ROHS requirements. 24-hour service is available.


Brazing is a proven, economical way to permanently join metals. Properly designed and brazed joints are actually stronger than the base metals of the components. Unusual shapes and multi-joint designs can be brazed in bulk without special fixtures. It is also possible to join dissimilar metals and thin gages. Brazing is often a superior option to welding. Faspro Technologies uses cadmium and lead free brazing paste making it easier for you to comply with REACH and ROHS requirements.


Engraving is a great way to mark, logo, number or customize your product. Faspro Technologies utilizes various methods of engraving, including laser marking, chemical milling, engraving and stamping.

Heat Staking

Heat staking is a method of joining two or more parts, where at least one of the parts is made out of plastic. The bond is made by partially deforming the plastic part in order to fixate the other. Heat staking makes it easy to bond metal to plastic, and is commonly used in high volume/low cost applications like Automotive, Telecom and Consumer Appliances. Faspro Technologies’ staff are expert in the heat staking process.

Hot Stamping

Faspro Technologies can execute hot stamping on any of your components. Hot stamping is a dry printing method in which a heated die and foil are used to apply graphics to a surface. This process is simple, cost effective and environmentally friendly.

Spot Welding

Faspro Technologies provides spot welding services for demanding medical, automotive and defense applications. Our certified welders are experienced in offering welding solutions for precision metal components manufactured from various materials. Contact us with your specific application needs.

Ultrasonic Welding

Faspro Technologies offers ultrasonic welding services. This industrial technique uses high-frequency ultrasonic acoustic vibrations that are locally applied to components being held together under pressure to create a solid-state weld. It is commonly used for plastics and for joining dissimilar materials.

Manufacture of Light-to-Medium Duty Assemblies

Faspro Technologies’ assembly department specializes in manufacturing assemblies from component parts to finished units that are ready for use. In many cases, these components are created in part or in whole by Faspro Technologies, but this is not always the case. Some clients provide us with components that have an outside manufacturer, leaving the assembly to Faspro.

Hardware Insertion

As a one-stop shop for sheet metal fabrication services, we perform hardware insertion operations for sheet metal parts used in a number of industries, including medical, automotive, and defense. Hardware insertion services are offered for the installation of a variety of components, including PEM nuts, standoffs and studs.

Kitting & Packaging

Some assemblies call for a “hands on” process for packaging or kitting. Let our assembly department meet all of your packaging and kitting requirements in a cost effective manner.

What Others Are Saying: